ADATA XPG Lancer Blade RGB 16GB DDR5-6400 CL32 Black

The ADATA XPG Lancer Blade RGB is a fast 16GB DDR5 stick at 6400 MT/s with CL32 timings, but it's sold as a single module. That means no dual channel out of the box, which hurts real world performance. Pricing varies from EUR 423 to EUR 606 in Europe, and you can often find 32GB dual channel kits for similar money.

The headline numbers here are 6400 MT/s and CL32-39-39 at 1.35V. That puts the speed in the 95th percentile of all desktop memory in our database, which is genuinely fast. Latency lands in the 88th percentile, so the CL32 rating is doing real work. In practice, this translates to snappy load times and solid frame pacing in games, especially on Intel platforms with XMP 3.0 enabled.

But there's a catch. This is a single 16GB stick, not a dual channel kit. Running one stick means you're getting half the memory bandwidth of a 2x8GB or 2x16GB setup. For gaming, that can cost you anywhere from a few percent to double digits in CPU bound scenarios. The speed is there, but the configuration holds it back. If you're building a workstation or doing heavy multitasking, the 16GB capacity is also on the lean side for 2025 workloads.

Against the Corsair VENGEANCE RGB CMH64GX5M2Y6400C32, the ADATA stick is faster per module but loses on total capacity. The Corsair kit is 64GB across two sticks, so you get dual channel and four times the memory. The Kingston FURY Beast KF560C30BWEAK2-64 runs at 6000 MT/s with tighter CL30 timings, which can actually perform similarly in real world tasks while giving you 64GB. The G.Skill Trident Z5 Royal Neo RGB F5-6000J2836G16GX2-TR5NG is another 6000 MT/s option with RGB and a 32GB total, often at a better price per gigabyte.

The Crucial Pro Overclocking CP2K16G64C32U5B is the budget alternative. It's a 32GB kit at 6400 MT/s with CL32, so you get dual channel and double the capacity for potentially less money. The KLEVV CRAS V RGB KD5KGUD80-60A300G-BLACK runs at 6000 MT/s with RGB and is usually priced more aggressively. If you're set on 6400 MT/s specifically, the ADATA holds its own, but the single stick configuration makes it a harder sell against dual channel kits.

Value is tricky here because the price spread is so wide. In Europe, you're looking at EUR 423 to EUR 606 for the same stick, which is a EUR 183 gap. That's not a small difference. If you can find it at the lower end of that range, it's a reasonable deal for 6400 MT/s DDR5. At the higher end, you're paying a premium for the XPG branding and RGB. The US price of USD 595 and CAD 600 in Canada both feel steep for 16GB of RAM, even fast RAM. For comparison, you can often find 32GB kits at similar speeds for not much more, and those give you dual channel plus double the capacity.

The ADATA XPG Lancer Blade RGB AX5U6400C3216G-SLABRBK is a single 16GB stick of DDR5 memory running at 6400 MT/s with CL32 timings. It sits in that enthusiast sweet spot where you're paying for speed, not capacity. The low profile heat spreader and RGB lighting make it a decent fit for builds where clearance matters, though the single stick configuration means you're leaving dual channel performance on the table unless you buy a second one.

Pricing is all over the place depending on where you shop. European listings range from EUR 423 to EUR 606, which is a massive spread for the same stick. If you're in the EU, it's worth checking which vendor has the lower end of that range before you commit. The US listing sits at USD 595, and Canadian buyers are looking at CAD 600.

For a 16GB DDR5 kit at 6400 MT/s, this is aimed at gamers and enthusiasts who want fast memory without the bulk of tall heat spreaders. The XMP 3.0 support means you can hit those rated speeds with a single BIOS toggle on Intel platforms, assuming your motherboard and CPU can handle it.

Skip this if you're building a new PC from scratch. A 2x16GB kit at 6000 MT/s or 6400 MT/s will give you dual channel bandwidth and double the capacity for often the same or less money. Server builders should look elsewhere entirely, as this stick scores just 26.6 out of 100 for server workloads. If you're on a budget, the Crucial Pro Overclocking CP2K16G64C32U5B or KLEVV CRAS V RGB are better value picks. And if you need lots of RAM for video editing or 3D work, 16GB simply won't cut it.

Should you buy this? If you already have one stick and want to add a second for dual channel, sure, it makes sense. But as a standalone purchase, it's a tough recommendation. The speed is excellent, the latency is solid, and the low profile design is genuinely useful. But you're paying enthusiast prices for a single stick that leaves performance on the table.

For most builders, a 2x16GB kit at 6000 MT/s or 6400 MT/s will serve you better. You get dual channel bandwidth, double the capacity, and often a better price per gigabyte. The ADATA XPG Lancer Blade RGB is a good stick of RAM in a configuration that doesn't make much sense for most people.