A-Tech Enterprise 32GB (2x16GB) DDR4-2400

★★★★★ 4.8 (63)

This 32GB DDR4 kit uses ECC Unbuffered memory at 2400MHz to reduce data corruption in critical server and workstation environments. It is backed by a limited lifetime warranty and rigorous module-level testing for trusted reliability in 24/7 operations. This memory is best for IT administrators upgrading entry-level servers or workstations that specifically require ECC UDIMM, not Registered or standard desktop RAM.

Capacity 32GB
Kit 2 x 16GB
Memory DDR4
Speed 2400 MT/s
Form Factor UDIMM
ECC はい
A-Tech Enterprise 32GB (2x16GB) DDR4-2400 ram
45 総合スコア

現在、販売店の最新価格はありません

他の国でも利用可能:

概要

The 30-Second Version

The A-Tech Enterprise Series is a 32GB kit of DDR4 ECC unbuffered memory for servers and workstations. It runs at a modest 2400 MT/s, but ECC support and dual-rank layout are the real selling points. Pricing varies, with a EUR 44 spread between European listings, so shop around. Buy it if your board needs ECC UDIMMs, skip it if you want speed or desktop compatibility.

Pros & Cons

長所

  • ECC unbuffered support for servers and workstations that require it 75th
  • 32GB across two modules is a practical capacity for home labs and NAS boxes 72nd
  • Dual-rank 2Rx8 layout helps memory parallelism in server workloads 71st
  • Runs at standard 1.2V, so no extra heat or power draw
  • Limited lifetime warranty from A-Tech

短所

  • 2400 MT/s is slow compared to modern DDR4 and DDR5 kits
  • Latency ranking is near the bottom of our database
  • Only works with ECC UDIMM boards, not desktops or laptops
  • Cannot be mixed with registered, load-reduced, or non-ECC memory
  • Pricing is inconsistent across regions

実証データ

Performance

Let's be straight about the numbers. 2400 MT/s puts this kit in the bottom third for speed among memory we track, and the latency ranking is one of the worst we've seen. If you're chasing benchmark scores, this is not your kit. But for the intended use case, that's mostly fine. Most DDR4 server boards from the Xeon E3 and early Ryzen Pro eras run memory at 2133 or 2400 MT/s anyway, so this kit matches what those platforms actually support. You're not leaving much on the table.

The dual-rank configuration is the quiet strength here. Two ranks per module can improve memory-level parallelism, which helps in server workloads that hammer lots of small transactions. In our database, the capacity score lands in the upper-middle range, and 32GB across two modules is a practical sweet spot for a home server or a small virtualization box. You can run a handful of VMs or containers without immediately needing to add more sticks. Just don't expect this to feel snappy in a desktop productivity benchmark, because that's not the job.

Performance Percentiles

Speed 28.6
Feature 74.9
Latency 8.1
Capacity 70.6
ユーザー評価 72.4
Affordability 41.1

Specifications

Full Specifications

Memory

Type DDR4
Form Factor UDIMM
Total Capacity 32768
Modules 2
Per Module 16384
Pins 288
Rank 2Rx8

Performance

Speed 2400
Voltage 1.2

Class

ECC Yes
Registered No

Features

RGB No
Heat Spreader No

vs Competition

The competitors in our database are mostly high-end DDR5 kits like the G.Skill Trident Z5 Royal Neo, Kingston Fury Renegade, and Corsair Vengeance RGB. Those are faster, flashier, and aimed at a completely different buyer. Comparing this A-Tech kit to a 6000 MT/s DDR5 kit is like comparing a delivery van to a sports car. The van isn't exciting, but it carries the load without drama. If you need ECC UDIMMs, those DDR5 kits won't even fit your board.

Where the comparison gets more useful is against other ECC UDIMM options from Crucial or Kingston's server lines. Those tend to be more expensive per gigabyte, but they sometimes offer better latency bins or more consistent availability. The A-Tech kit wins on price in some regions and loses in others. The Crucial Pro Overclocking kit in our list is non-ECC, so it's not a direct alternative for a server. If your board takes ECC UDIMMs, your realistic choices are A-Tech, used enterprise pulls, or paying a premium for a bigger brand. A-Tech is betting you'll take the warranty and the new-module peace of mind.

Spec A-Tech Enterprise Kingston FURY Beast KF564C32BWEAK2-64 G.Skill Trident Z5 Royal Series F5-6000J2636H32GX2-TR5NG Corsair VENGEANCE RGB CMH64GX5M2Y6400C32 Team Group T-CREATE EXPERT CTCWD532G6400HC32ADC01 Crucial Pro OC Gaming CP2K32G60C40U5B
Capacity 32GB 64GB 64GB 64GB 32GB 64GB
Kit 2 x 16GB 2 x 32GB 2 x 32GB 2 x 32GB 2 x 16GB 2 x 32GB
Memory Type DDR4 DDR5 DDR5 DDR5 DDR5 DDR5
Speed Mts 2400 6400 6000 6400 6400 6000
Cas Latency - CL32 CL26 CL32 CL32 CL40
Form Factor UDIMM UDIMM UDIMM UDIMM UDIMM UDIMM
Ecc true false false false false false
Compare Compare Compare Compare Compare
製品 SpeedFeatureLatencyCapacityユーザー評価Affordability
A-Tech Enterprise 28.674.98.170.672.441.1
Kingston FURY Beast KF564C32BWEAK2-64 Compare 94.889.687.689.692.28
G.Skill Trident Z5 Royal Series F5-6000J2636H32GX2-TR5NG Compare 87.689.69989.674.13.7
Corsair VENGEANCE RGB CMH64GX5M2Y6400C32 Compare 94.889.687.689.697.87
Team Group T-CREATE EXPERT CTCWD532G6400HC32ADC01 Compare 94.874.987.670.692.224.3
Crucial Pro OC Gaming CP2K32G60C40U5B Compare 87.674.968.989.685.515.1

価格

Value & Pricing

Value is where this gets a little weird. In the US, you're looking at $280 for 32GB of ECC UDIMM DDR4. That's not cheap for 2400 MT/s memory, but ECC UDIMMs have always carried a premium because they're a niche product. The affordability score sits below average in our database, which tracks with what we see. You're paying for compatibility and stability, not speed.

In Europe, the spread is worth paying attention to. German and French listings range from EUR 407 to EUR 451, which is a meaningful gap of EUR 44 for the same kit. If you're buying in that region, shop around before you click. The lower end of that range is the better deal, obviously. Just make sure you're comparing the same part number and not a different ECC type, because mixing ECC UDIMMs with registered or load-reduced modules is a recipe for a system that won't POST.

詳細情報

Overview

The A-Tech Enterprise Series AT16G2D4D2400UD8N12V is a 32GB kit of DDR4 ECC unbuffered memory aimed squarely at servers and workstations that need stability more than they need flashy speed. This is not the RAM you buy to squeeze extra frames out of a gaming rig. It's the RAM you buy so a NAS, a home lab box, or an older Xeon workstation stops crashing when you push it. And honestly, that's a refreshingly honest pitch in a market full of RGB everything.

At 2400 MT/s and 1.2V, this kit sits at the JEDEC baseline for DDR4. The headline here isn't raw bandwidth, it's the ECC part. Error-correcting code memory catches and fixes single-bit errors on the fly, which matters when you're running a file server for years or doing long renders where a flipped bit means a corrupted file. The 2Rx8 dual-rank layout also helps with memory bandwidth in some server workloads, even if the clock speed is modest.

Who is this for? Someone with a DDR4 server or workstation board that takes ECC UDIMMs, which is a specific niche. Not desktop boards, not laptops, and definitely not anything that needs registered or load-reduced DIMMs. If you know you need ECC UDIMMs, you already know how annoying they are to find at a decent price. That's where A-Tech is trying to win you over.

Common Questions

Q: Will this memory work in a regular desktop PC?

No. This is ECC unbuffered UDIMM memory, which only works in server and workstation boards that explicitly support ECC UDIMMs. Standard desktop boards almost always require non-ECC memory, and laptops use SODIMMs, not full-size DIMMs. Check your motherboard's memory compatibility list before ordering.

Q: Can I mix this with my existing non-ECC or registered memory?

No, and this is a hard rule. ECC unbuffered memory cannot be mixed with non-ECC unbuffered, ECC registered, or load-reduced DIMMs. The system will likely fail to boot or become unstable. If you're adding to an existing setup, all modules should match in type, capacity, and ideally speed.

Q: Is 2400 MT/s fast enough for a server?

For most DDR4 server platforms that use ECC UDIMMs, yes. Many of those boards run memory at 2133 or 2400 MT/s by default, so this kit matches the platform's native speed. You won't see a benefit from faster memory on those boards. The dual-rank 2Rx8 layout can also help with memory bandwidth in certain server workloads.

Q: What kind of warranty does A-Tech offer?

A-Tech covers this memory with a limited lifetime warranty. That's a meaningful benefit for server memory that runs around the clock. If a module fails, you're not stuck buying a whole new kit. Just keep your proof of purchase and contact their support team for a replacement.

Who Should Skip This

If you're building or upgrading a gaming PC, a regular desktop, or a laptop, this memory is not for you. It won't physically work in most of those systems, and even if it did, the 2400 MT/s speed and bottom-tier latency would hold you back. You'd be better off with a standard non-ECC DDR4 or DDR5 kit, which will be faster and cheaper for those use cases.

Also skip this if your server board requires registered or load-reduced DIMMs. That's a different memory type entirely, and this kit won't fit or function. And if you're running a newer DDR5 server platform, this DDR4 kit is simply incompatible. In those cases, look for RDIMMs or DDR5 ECC UDIMMs from a vendor that matches your board's QVL.

Verdict

If you're running a DDR4 server or workstation that requires ECC unbuffered memory, this A-Tech kit is a reasonable way to get 32GB without hunting down used enterprise pulls. The 2400 MT/s speed is fine for the platforms that actually use this memory, and the dual-rank layout is a small bonus for server workloads. The lifetime warranty is also a genuine comfort when you're buying memory for a machine that will run 24/7.

For a home lab or a NAS, this is a solid pick if the price is right in your region. For a workstation that also does heavy single-threaded work, the slow latency might bug you, but ECC is the point, not speed. If you don't need ECC, skip this entirely and buy faster non-ECC memory for less money. And if your board needs registered DIMMs, this won't work at all. Check your motherboard's memory QVL before you buy, because ECC UDIMM compatibility is picky.

Usage Scores

総合 (45.4)Budget (69.1)ゲーム (42.8)Laptop (33.9)Server (69.5)Workstation (60.1)
  • 総合45.4
  • Budget69.1
  • ゲーム42.8
  • Laptop33.9
  • Server69.5
  • Workstation60.1

その他の構成3

類似製品