Kingston ValueRAM 4GB DDR3-1600 CL11 Green
Operating at 1600 MT/s with CL11 timings, this single 4GB DDR3 UDIMM provides a straightforward capacity upgrade for older systems. Its gold-plated 240-pin connectors ensure reliable contact in standard desktop DIMM slots. This module is best for users maintaining legacy PCs who need a basic memory boost for routine tasks, not modern gaming or workstation loads.
No current retailer price
Snapshot
The 30-Second Version
The Kingston ValueRAM KVR16N11S8/4 is a bare-bones 4GB DDR3 stick that's dirt cheap and gets the job done for legacy systems. It ranks at the 97th percentile for affordability but only the 9th for capacity, so it's strictly for basic use. Prices swing from USD 23 to USD 53 in the US, so shop around. If you need more than 4GB or faster speeds, look elsewhere.
Pros & Cons
Pros
- Dirt cheap, especially at the low end of the USD 23 to USD 53 range 97th
- Kingston's compatibility testing means it'll likely just work in older systems
- Standard 1.5V DDR3 spec, no surprises for legacy boards
- Affordability ranks at the 97th percentile, one of the cheapest options around
- Single-sided 1Rx8 design fits in tight spaces and low-profile builds
Cons
- 4GB capacity is at the 9th percentile, barely enough for modern OSes
- Speed sits at the 14th percentile, slow even by DDR3 standards
- No heat spreader, so it runs warmer under sustained load
- CL11 timings are looser than the CL9 mentioned in the description, which is confusing
- Price spread in the US is wild, USD 23 to USD 53 for the same stick
The proof
Performance
Let's be honest about what 1600 MT/s with CL11 timings gets you in 2025. It's fine for basic computing, web browsing, office work, and keeping an older machine running. But the speed ranking sits at the 14th percentile, which means this module is slower than the vast majority of memory in our database. That's not a surprise for DDR3, but it's worth knowing before you expect any kind of snappy performance.
The latency story is a bit more forgiving. CL11 at 1600 MT/s lands at the 58th percentile, which is about average for this class of memory. You won't feel the timings holding you back in everyday tasks. The real limitation is the 4GB capacity, which ranks at the 9th percentile. That's a single stick, and for modern operating systems, 4GB is the bare minimum to function. Windows 10 or 11 will run, but you'll feel the squeeze with more than a few browser tabs open.
Specifications
Full Specifications
Memory
| Type | DDR3 |
| Form Factor | UDIMM |
| Total Capacity | 4096 |
| Modules | 1 |
| Per Module | 4096 |
| Pins | 240 |
| Rank | 1Rx8 |
Performance
| Speed | 1600 |
| CAS Latency | 11 |
| Timings | 11-11-11 |
| Voltage | 1.5 |
Class
| ECC | No |
| Registered | No |
| OC Profile | Not Applicable |
Features
| RGB | No |
| Heat Spreader | No |
vs Competition
The Timetec 76 is probably the closest direct competitor here. It's another budget DDR3 option aimed at the same market, and it tends to score slightly higher overall. The G.Skill Ripjaws Series F4-2400C16S-4GRS is a different beast entirely. It runs at 2400 MT/s, which is significantly faster, and it comes with a heat spreader. If your board supports higher DDR3 speeds, the G.Skill is the better pick for performance.
The KLEVV KD48GS880-32N220A and OWC OWC3S2D41R808GB are both higher-capacity options. The KLEVV is a 32GB module, which is overkill for most DDR3 systems, but if you're maxing out a workstation, it's worth a look. The OWC is an 8GB stick, which is the sweet spot for older systems that need more headroom than 4GB. The Micron Desktop Memory MTA4ATF51264AZ-3G2J1 is another 4GB option, but it runs at DDR4 speeds, so it's not compatible with DDR3 boards. If you're on DDR4, that's the one to consider.
| Spec | Kingston ValueRAM | G.Skill Trident Z5 Royal Series F5-6000J2636H32GX2-TR5NG | Corsair VENGEANCE RGB CMH64GX5M2Y6400C32 | Team Group T-CREATE EXPERT CTCWD532G6400HC32ADC01 | Crucial Pro OC Gaming CP2K32G60C40U5B | KLEVV CRAS V RGB KD5KGUD80-60A300G-BLACK |
|---|---|---|---|---|---|---|
| Capacity | 4GB | 64GB | 64GB | 32GB | 64GB | 64GB |
| Kit | 1 x 4GB | 2 x 32GB | 2 x 32GB | 2 x 16GB | 2 x 32GB | 2 x 32GB |
| Memory Type | DDR3 | DDR5 | DDR5 | DDR5 | DDR5 | DDR5 |
| Speed Mts | 1600 | 6000 | 6400 | 6400 | 6000 | 6000 |
| Cas Latency | CL11 | CL26 | CL32 | CL32 | CL40 | CL30 |
| Form Factor | UDIMM | UDIMM | UDIMM | UDIMM | UDIMM | UDIMM |
| Ecc | false | false | false | false | false | false |
| Compare | Compare | Compare | Compare | Compare |
| Product | Speed | Feature | Latency | Capacity | Affordability |
|---|---|---|---|---|---|
| Kingston ValueRAM | 13.8 | 56.6 | 57.6 | 9 | 97 |
| G.Skill Trident Z5 Royal Series F5-6000J2636H32GX2-TR5NG Compare | 87.6 | 89.6 | 99 | 89.6 | 3.7 |
| Corsair VENGEANCE RGB CMH64GX5M2Y6400C32 Compare | 94.8 | 89.6 | 87.6 | 89.6 | 7 |
| Team Group T-CREATE EXPERT CTCWD532G6400HC32ADC01 Compare | 94.8 | 74.9 | 87.6 | 70.6 | 24.3 |
| Crucial Pro OC Gaming CP2K32G60C40U5B Compare | 87.6 | 74.9 | 68.9 | 89.6 | 15.1 |
| KLEVV CRAS V RGB KD5KGUD80-60A300G-BLACK Compare | 87.6 | 89.6 | 87.6 | 89.6 | 9.5 |
Price
Value & Pricing
The value story here depends entirely on where you buy it. In the US, the spread between USD 23 and USD 53 is significant. At USD 23, this is a no-brainer for anyone who needs a cheap 4GB DDR3 stick. At USD 53, you're overpaying for what is essentially commodity memory. Best Buy lists this module, and their price match guarantee might help, but you should absolutely check other sellers before pulling the trigger.
In Europe, the EUR 19 to EUR 22 range is much more consistent, and at that price, it's hard to complain. You're getting a reliable, tested module from a major manufacturer for less than the cost of a pizza. The affordability percentile confirms this is one of the cheapest memory options in our database, which is exactly what ValueRAM is supposed to be.
Read more
Overview
The Kingston ValueRAM KVR16N11S8/4 is about as straightforward as RAM gets. It's a single 4GB stick of DDR3 running at 1600 MT/s with CL11 timings, built for people who just need a compatible module without any fuss. No heat spreaders, no RGB, no marketing theatrics. Just a green PCB and a spec sheet.
This is memory for the white box crowd and system integrators. If you're reviving an old office PC, upgrading a hand-me-down desktop, or keeping a legacy system alive, this is the kind of part you reach for. Kingston has been in this game forever, and ValueRAM is their no-nonsense line aimed at people who buy by spec rather than by brand hype.
The interesting thing here is the price spread. In the US, you'll see this stick listed anywhere from USD 23 to USD 53 depending on the seller. That's a huge gap for the same module, and it means shopping around actually matters. In Europe, the spread is tighter at EUR 19 to EUR 22, which is much more reasonable. Either way, this is budget territory, and the affordability ranking backs that up at the 97th percentile.
Common Questions
Q: Will this work in my older desktop?
If your board uses DDR3 UDIMMs and supports 1600 MT/s, this should work. Kingston tests ValueRAM for compatibility across a wide range of systems, and the standard 1.5V spec means it'll play nice with most DDR3 boards. Just double-check that your motherboard accepts 4GB modules, as some very old boards have per-slot limits.
Q: Is 4GB enough for Windows 10 or 11?
It'll run, but it won't be comfortable. Windows 10 can get by on 4GB for light tasks like web browsing and document editing, but you'll hit slowdowns with multiple tabs or background apps. Windows 11 officially requires 4GB minimum, but in practice, 8GB is the realistic floor for a smooth experience. If you can swing an 8GB module, do it.
Q: Why is the price so different between sellers?
This is a commodity product, and different retailers price it based on their own inventory and margins. In the US, we've seen listings from USD 23 to USD 53 for the exact same module. Best Buy offers a price match guarantee, so if you find it cheaper elsewhere, you can try to get them to match it. In Europe, the spread is much tighter at EUR 19 to EUR 22.
Q: Can I mix this with other RAM sticks?
Technically yes, but it's not ideal. Mixing different capacities, speeds, or timings can cause stability issues or force all modules to run at the slowest common speed. If you're adding this to an existing 4GB stick, try to match the speed and timings as closely as possible. For best results, buy a matched kit instead of mixing singles.
Who Should Skip This
If you're building a system for anything beyond basic office work or web browsing, skip this. 4GB is not enough for gaming, content creation, or running virtual machines. The gaming score of 30.1 out of 100 and the total score of 32.8 tell the story. You'd be better off with an 8GB module like the OWC OWC3S2D41R808GB or a faster option like the G.Skill Ripjaws F4-2400C16S-4GRS.
Also skip this if you're on a DDR4 or DDR5 platform. This is DDR3, and it won't physically fit in newer boards. The Micron MTA4ATF51264AZ-3G2J1 is a DDR4 alternative if you need a budget 4GB stick for a newer system. And if you're running a server, look elsewhere entirely. The server score of 15.8 out of 100 is the weakest area for this module, and you'll want ECC memory for any kind of server workload.
Verdict
If you're nursing an old DDR3 system back to health and just need a compatible 4GB stick, the Kingston ValueRAM KVR16N11S8/4 does the job. It's cheap, it's tested, and it'll slot into most boards without drama. Just make sure you're paying closer to USD 23 than USD 53 if you're in the US.
For anyone building or upgrading a system that will actually be used daily, 4GB is a tough sell. You'd be better off spending a bit more on an 8GB module or looking at the G.Skill Ripjaws if your board supports faster speeds. This stick is a stopgap, not a solution.
Usage Scores
- Overall32.8
- Budget78.4
- Gaming30
- Laptop24.3
- Server15.8
- Workstation27.9